Skip to main content

Dinan Cold Air Intake - 2011 BMW 1M

Part # D760-0034 Be the first to write a review

Carbon Fiber - E82

Read More

Dinan Cold Air Intake - 2011 BMW 1M

Not Available

As boost is increased through the use of performance software, the single factory intake becomes restrictive and the engine is lacking the air it needs to make maximum power. Our cold air intake force feeds the 3-liter turbocharged inline 6 with greater volumes of cool, oxygen-rich air for substantial power gains by utilizing our secondary carbon fiber intake. The system is so effective that the carbon fiber inlet air temperature is a full 40 degrees Fahrenheit cooler than the incoming air from the stock inlet. Due to the increased airflow from our intake, the power-curve is extended into the higher RPMs for a noticeable change. The system is a direct replacement for the factory air box lid, employing a hand-crafted carbon fiber unit that also includes a secondary carbon fiber intake tube that captures cool air from the lower grill and includes the shielding for the conical filter to insulate it from power-robbing engine compartment heat.

Features:

  • More Power: Up to + 14 HP @ 6000 RPM, + 16 LB-FT @ 3400 RPM (coupled w/ engine software)
  • More Power: + 5 HP @ 6000 RPM, + 6 LB-FT @ 3400 RPM
  • Increased engine output across the power band
  • Carbon Fiber construction
  • Sealed system for maximum insulation from power robbing heat
  • Additional secondary inlet (and filter) for additional air flow
  • Less restrictive filter element for optimum flow (stock location)

About Dinan

Dinan has the parts to take your BMW, Mercedes-Benz, or Mini to the next level, whether you need hard parts such as exhaust systems or coilovers, or ECU upgrades to unlock your engine's potential.

Air Box IncludedYes
Brand Dinan
Dinan Point Value3
Emission Code7
Height22
Labor Time (Hours)3.8
Length15
Max HP Gain14 @ 6000 RPM
Max Torque (lb-ft) Gain16 @ 3400 RPM
Product TypeCold Air Intake
Weight13.5
Width15
UPC813725023816
Part NumberD760-0034
7

This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
This kit requires the deletion of the auxiliary radiator in the front left of the car. A Dinan High Capacity Oil Cooler is required to maintain adequate engine cooling and warranty coverage.
Reviews

    Your Review

    *Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.