Skip to main content

Flowtech Long Tube Header - Ceramic Coated

Part # 32540FLT Be the first to write a review

Fits 1965-1974 Ford F100/150/250 2WD: 352-428, Tube Size 1.75", Collector Size 3"

Flowtech Long Tube Header - Ceramic Coated

In Stock
Free Shipping - Lower 48 US States
$614.95
Add to Wishlist

4

Emissions

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

    See Emissions Details
FLOWTECH headers are precision engineered and leak tested to get maximum performance from your engine. Each header is formed from specially selected .049 cold roll flash controlled tubing, and features FLOWTECH's exclusive, thick, mandrel-formed Power Plenum collector. All ports are precisely fitted and finished with sturdy, leak-proof O-ringed port seals, and all FLOWTECH headers include all mounting hardware including bolts, nuts and premium gaskets. FLOWTECH headers are available with either a high-quality satin black paint finish or with a specially formulated, NASA-developed silver luster ceramic coating for rust and corrosion resistance.

Features:

  • Improved Exhaust Scavenging for Increased Performance
  • Leak Test For Max Performance
  • Ceramic Headers
  • Rust And Corrosion Resistance
  • Mandrel-Formed Power Plenum
  • Leakproof O-Ringed Port Seals
  • Include All Mounting Hardware

About Flowtech Exhaust

Flowtech provides high-quality performance exhaust systems at a great value. Explore our lineup of headers, mufflers, and exhaust systems at our official retailer, Holley.com!​

Air Injection TubesNo
Bolt Size3/8-16 x 3/4 IN
Bolts IncludedYes
Brand Flowtech Exhaust
California Proposition 65Yes
CARB (California) CompliantNo
CategoryExhaust
Collector Attachment3-Bolt Flange
Collector Diameter3.00 IN
Collector Port Diameter3.00 IN
Collector Reducer IncludedYes
Collector Reducer Outlet Diameter2.50 IN
ColorSilver
DesignLong Tube
Drive2WD
EGT PortNo
Emission Code4
EngineFord FE Block
FinishCeramic Coated
Flange Thickness0.375 IN
3/8 IN
Gasket Or Seal IncludedYes
Grade TypePerformance
Header SeriesFlowtech II
Header StyleLong Tube
MaterialMild Steel
Mounting Hardware IncludedYes
Oxygen Sensor PortNo
Part TypeExhaust Header
Port ShapeRectangle
Primary Tubing Diameter1 3/4 IN
1.75 IN
Product TypeHeaders
QuantitySold as a Pair
Sub CategoryExhaust Manifolds
Tube Wall Thickness16 GU
UPC787480325402
Part Number32540FLT
4

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Please call Flowtech tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Flowtech does not recommend the use of header wraps as this will void the warranty. Will not fit 1968-1972 Camper Special gas tanks.
Reviews

    Your Review

    *Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.

    Flowtech Long Tube Header - Ceramic Coated
    Flowtech Long Tube Header - Ceramic Coated
    $614.95