Free shipping on orders over $100 Details
MENU
How To Install The Holley Sniper EFI Conversion Fuel TankYouTube Button

Sniper EFI Fuel Tank System 255 LPH

1963-67 Corvette, Coated Steel, EFI, Gas

PART# 19-147

Be the first to write a review
$725.00   Suggested Retail
$586.76   Holleydays Price
Free Shipping
In Stock  
Qty: 
Add to Wish List

Starting at $52 a month with Learn More

Overview

Holley and Sniper will help you to complete your EFI swap with our new EFI Conversion Fuel Tanks. Each tank is a direct fit for your application-no modifications necessary. The kit includes the tank, a 255 lph fuel pump, internal baffling and a fuel level sending unit. The tank is powder coated for corrosion resistance and great looks. These tank kits are a complete solution for your EFI project! ***You must use your existing stock filler neck or purchase one through restoration suppliers. ***This kit includes a fuel gauge sender for use with FACTORY FUEL GAUGE and wiring. If you are using an aftermarket gauge, you will also need a sending unit for that gauge ohm range. Supports up to 550 EFI (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Size is: 38" x 15-3/4" x 11-3/4"

Features:

  • Tanks are coated galvanized steel then powder coated silver for total corrosion protection
  • 255 lph fuel pump with hanger assembly gives you the fuel you need with in-tank quietness
  • Sender has ¼” NPT Supply and Return line ports for easy fuel line connection and a barbed vent fitting
  • Fuel level sender included with the correct ohm range for your factory gauges
  • Fuel pump and sender are recessed in the tank to provide an easy installation with no modification to your car
  • EFI style tank baffling includes a large 4.3 liter internal fuel tray to prevent fuel pump starvation
  • Fits and looks like an OE tank when installed
  • Complete bolt in solution for your EFI conversion
  • Includes new tank straps

Specs

Application1963-67 Chevrolet Corvette
BrandSniper
ColorSilver
Drain PlugNo
Emission Code4
FinishPowdercoated
Free Flow LPH255
Fuel Sending Unit Ohms63-67 Corvette Factory
Fuel System TypeGasoline
Gallon Capacity18
MaterialSteel
New Straps IncludedYes
Product TypeFuel Tank
WarrantyLimited 90 Day
Part Number19-147

Service Parts


Emissions

4

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

In The Box

In The Box

  • Fuel Tank
  • Sending Unit
  • Fuel Pump Module
  • Fuel Tank Straps
  • Detailed Installation Instructions

Tech Resources

For a better seal use Permatex Indian Head Gasket Shellac Compound or Aviation Form-A-Gasket sealant on the gasket and screws. ***This kit includes a fuel gauge sender for use with FACTORY FUEL GAUGE and wiring. If you are using an aftermarket gauge, you will also need a sending unit for that gauge ohm range. Ohms test first number is empty, the second number is full Sender & 12v = 2-120 ohms Sender & Ground = 120-2 ohms 12v & ground = 120 ohms constant *** Kit includes a strap spacer to go over sending unit when installing fuel tank strap (pictured).

Warranty Information

Limited 90 Day: See Details

Applications

We Suggest
    Also Bought
      Reviews

        *Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.

        Some parts are not legal for use in California or other states with similar regulations.

         X  Holleydays 2020 20% off and DD
         X  Holleydays 2020 20% off and DD