850 CFM Marine Carburetor
Electric ChokeMechanical Secondaries-4150
CFM
- 600
- 850
PART# 0-80443
Be the first to write a review
$1,043.00
Suggested Retail
$937.95 Your Price
$937.95 Your Price
Free Shipping
In Stock
Qty:
Add to Wish List
Starting at $83 a month with
Learn More
Overview
All Holley Marine Carburetors are designed to meet Coast Guard specifications. A marine carburetors fuel metering system is calibrated to compensate for unique engine loads found on boats. The J-style vent tubes direct fuel/fumes back into the carburetor for safe operation while on rough waters.
The Holley 0-80443 Marine carburetor is designed with a universal calibration good for large cubic inch marine engines where a mechanical secondary 4150 model 4BBL with electric choke is required
Features:
- Gold Dichromate finish for corrosion resistance and classic Holley looks
- Universal Marine Calibration
- Factory preset electric choke for easy startups
- Mechanical secondaries for awesome performance
- 30cc primary and 50cc secondary accelerator pumps for additional fuel under initial acceleration
- Dual feed fuel inlets for constant high volume fuel delivery
- J-Style Vent Tubes
- Meets Coast Guard Specifications
- Power valve blow-out protection
- 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
Specs
| Barrels | 4 |
|---|---|
| Booster | Down Leg |
| Brand | Holley |
| Carburetor Use | Marine |
| CFM | 850 |
| Choke | Electric |
| Condition | New |
| Emission Code | 3 |
| Finish | Gold Dichromate |
| Fuel | Gasoline |
| Fuel Inlet | Dual |
| Marine Engine Size | Universal |
| Marine Use | Yes |
| Material | Zinc |
| Model | 4150 |
| Primary Main Jet | 88 |
| Primary Power Valve | 6.5 |
| Primary Pump Nozzle Size | 31 |
| Product Type | Carburetor |
| Secondaries | Mechanical |
| Secondary Main Jet | 96 |
| Secondary Pump Nozzle Size | 31 |
| Supercharged Application | No |
| Throttle Bore | 1.750 inch |
| Warranty | Limited 90 Day |
| Part Number | 0-80443 |
Service Parts
![Inlet Needle - Viton]()
Inlet Needle Viton® Tip Adjustable 0.110" Seat Size (Viton® is a registered trademark of DuPont Performance Elastomers)$17.69Qty:![Carburetor Standard Main Jet]()
![Carburetor Standard Main Jet]()
![Marine Fuel Line]()
Marine Fuel Line Chrome For Holley Model 4150 Marine Carburetor 5/8-18 inverted flare inlet. 9.313" center to center.$67.43Qty:![Holley Marine Decal]()
Emissions
3
This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
The following vehicles are considered Racing Use Only Vehicles:
- Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
The following vehicles are considered Emissions Controlled Vehicles:
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicle
*Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.
