Earl's Oil Filter Block-Off - Fits M22 x 1.5 Filters

Part # HEMI0001ERL

Block-Off Plate - Fits 2008-up Gen III Hemi Engines w/ M22 x 1.5 Threads for Filter

In Stock

Free Shipping on orders over $149*

$33.48

Add to Wishlist

Does it fit my vehicle?Does it fit my engine?

The factory oil filter location on the Gen III Hemi may interfere with the crossmember or suspension in some engine swaps. These block-off plates & relocation kits allow the oil filter to be moved to a remote location. The block-off adapter screws on instead of the oil filter and the two 3/8" NPT ports on the block near the filter allow installation of the AN hoses for plumbing the remote filter. Aluminum construction with black anodized finish.

Features:

Block-Off Adapter is Made from Aluminum w/ Black Anodized Finish – Attractive & Corrosion Resistant

About Earl's

Earl's Performance Plumbing specializes in high-quality AN fittings, hose, adapters, and more. With several lines of innovative plumbing products, Earl's can handle all of your automotive plumbing needs.

Anti-Drain Back Valve	No
Brand	Earl's
Bypass Relief Valve	No
Category	Plumbing
Center Stud Size	22MM x 1.5
Diameter	3.000"
Emission Code	5
Finish	Anodized Black
Gasket Or Seal Included	Yes
Gasket Type	O-Ring
Height	1.000"
Inner O-Ring Diameter	1.380"
Inside Thread Size	M22 x 1.50
Material	6061 Aluminum
O-Ring Cross Section	.139 Inches
Outer O-Ring Diameter	2.693"
Outside Diameter	3.000"
Part Type	Engine Oil Filter
Product Type	Oil Filter block-Off
Wrench Size	1-1/4
UPC	090127101797
Part Number	HEMI0001ERL

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.

Instructions - 199R12563.pdf

Most 2003-2007 Gen III Hemi Engines Use Oil Filters w/ 3/4"-16 Threads - use HEMI0002ERL or HEMI0004ERL. Most 2008-up Gen III Hemi Engines use Oil Filters w/ M22 x 1.5 Threads - Use HEMI0001ERL or HEMI0003ERL. A remote oil filter must be plumbed to the two 3/8" NPT ports on the cylinder block near the factory oil filter (the bottom port on the engine block is the inlet & the upper port is the outlet).

*Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.

Earl's Oil Filter Block-Off - Fits M22 x 1.5 Filters

$33.48

Earl's Oil Filter Block-Off - Fits M22 x 1.5 Filters

Earl's Oil Filter Block-Off - Fits M22 x 1.5 Filters

Also Bought

Features:

We Suggest