Modules

Items 1 - 101 of 101

Sort By

Show per page

Page:

1

220-VM-AF4-1234

4 CHANNEL WIDEBAND CONTROLLER

4 channel Air/Fuel module and harness for 1-2-3-4 cylinder layout

Part# 220-VM-AF4-1234

$1210.95

220-VM-AF4-1357

4 CHANNEL WIDEBAND CONTROLLER

4 channel Air/Fuel module and harness for 1-3-5-7 cylinder layout

Part# 220-VM-AF4-1357

$1210.95

220-VM-AF4-2468

4 CHANNEL WIDEBAND CONTROLLER

4 channel Air/Fuel module and harness for 2-4-6-8 cylinder layout

Part# 220-VM-AF4-2468

$1210.95

220-VM-AF4-5678

4 CHANNEL WIDEBAND CONTROLLER

4 channel Air/Fuel module and harness for 5-6-7-8 cylinder layout

Part# 220-VM-AF4-5678

$1210.95

AEM EFI INTERFACE MODULE

This V-Net module is used to communicate the serial data stream from an AEM EMS unit into RacePak's V-Net System.

Part# 230-VM-EFIAEM

$404.95

AUTRONIC SM4 EFI INTERFACE MODULE

This V-Net module is used to communicate the serial data stream from an Autronic SM4 EFI unit into RacePak's V-Net System.

Part# 230-VM-EFIAUT4

$404.95

EFI TECHNOLOGY EFI INTERFACE MODULE

This V-Net module is used to communicate the data stream from an EFI Tech ECU into RacePak's V-Net System.

Part# 230-VM-EFITECH

$404.95

FOUR CHANNEL EVENT MODULE

V-Net module for monitoring four channel inputs.

Part# 230-VM-4DIGIN

$150.95

Part# 220-VM-GPS

$331.95

230-VM-EFIMOTSR

MOTEC SERIAL EFI INTERFACE MODULE

This V-Net module is used to communicate the serial data stream from a MoTeC RS232 output into RacePak's V-Net System.

Part# 230-VM-EFIMOTSR

$404.95

PRO 1 / PROII INPUT A MODULE

This RPM module connects digital inputs such as Driveshaft, Fuel Flow, etc. to your Pro 1B/ Pro II data logger.

Part# 110-MD-INPA

PRO 1B / PRO II INPUT B MODULE

This RPM module connects digital inputs such as Delay Box, TDC, etc. to your Pro 1B/ Pro II data logger.

Part# 110-MD-INPB

PRO III BLUETOOTH MODULE

This module allows your Pro III or Pro 3A system to communicate with Racepak's Virtual Dash App.

Part# 130-VM-DASHAPP

PRO III EGT MODULE

This EGT module connects the EGT junction boxes to the Pro III’s network of sensors.

Part# 130-MD-EGT

130-MD-4ANA-1-4

PRO III HIGH SPEED ANALOG BOX

Part# 130-MD-4ANA-1-4

130-MD-4ANA-5-8

PRO III HIGH SPEED ANALOG BOX

Part# 130-MD-4ANA-5-8

PRO III INPUT A MODULE

This RPM module connects digital inputs such as Engine RPM, Driveshaft, Fuel Flow, etc. to your Pro III data logger.

Part# 130-MD-INPA

PRO III INPUT B MODULE

This RPM module connects digital inputs such as Inductive RPM, Mag Phase, TDC and the On/Off cable to your Pro III data logger.

Part# 130-MD-INPB

PRO III TRANSDUCER BOX

Series II Pro Transducer Box for use with Pro III series data loggers

Part# 130-VM-TB2

PRO III WARNING LIGHT BOX

Pro III series warning light modules. Used to trigger a warning LED.

Part# 130-VM-WARN

PRO IIIA INPUT A MODULE

This RPM module connects digital inputs such as Engine RPM, Driveshaft, Clutch, Fuel Flow, etc. to your Pro IIIA data logger.

Part# 130-MD-INPAA

PRO TRANSDUCER BOX, ORIGINAL SERIES

Part# 810-MB-4A

PRO TRANSDUCER BOX, ORIGINAL SERIES

Part# 810-MB-8P

$150.95

PRO TRANSDUCER PASS-THRU BOX, ORIGINAL SERIES

Part# 810-MB-4APT

240-IM-TRAV28RF

SHOCK TRAVEL MODULE

Part# 240-IM-TRAV28RF

$150.95

240-IM-TRAV38RF

SHOCK TRAVEL MODULE

Part# 240-IM-TRAV38RF

$150.95

240-IM-TRAV48LR

SHOCK TRAVEL MODULE

Part# 240-IM-TRAV48LR

$150.95

240-IM-TRAV48RR

SHOCK TRAVEL MODULE

Part# 240-IM-TRAV48RR

$150.95

240-IM-TRAV65LF

SHOCK TRAVEL MODULE

Part# 240-IM-TRAV65LF

$150.95

240-IM-TRAV72RR

SHOCK TRAVEL MODULE

Part# 240-IM-TRAV72RR

$150.95

240-IM-TRAV84LF

SHOCK TRAVEL MODULE

Part# 240-IM-TRAV84LF

$150.95

240-IM-TRAV84LR

SHOCK TRAVEL MODULE

Part# 240-IM-TRAV84LR

$150.95

TRANSDUCER BOX MODULE, ORIGINAL SERIES

G-Meter module for Pro Analog Transducer Box (original series).

Part# 810-MD-GM

TRANSDUCER BOX MODULE, ORIGINAL SERIES

0-5 volt module for Pro Analog Transducer Box (original series). Supplies 12 volt power to the sensor.

Part# 810-MD-0-5

TRANSDUCER BOX MODULE, ORIGINAL SERIES

Vacuum module for Pro Analog Transducer Box (original series).

Part# 810-MD-VAC

$284.95

TRANSDUCER BOX MODULE, ORIGINAL SERIES

0-15 PSI module for Pro Analog Transducer Box (original series).

Part# 810-MD-PT-15

$284.95

TRANSDUCER BOX MODULE, ORIGINAL SERIES

0-60 PSI module for Pro Analog Transducer Box (original series).

Part# 810-MD-PT-60

$284.95

TRANSDUCER BOX MODULE, ORIGINAL SERIES

0-100 PSI module for Pro Analog Transducer Box (original series).

Part# 810-MD-PT-100

$284.95

TRANSDUCER BOX MODULE, ORIGINAL SERIES

0-150 PSI module for Pro Analog Transducer Box (original series).

Part# 810-MD-PT-150

$284.95

TRANSDUCER BOX MODULE, ORIGINAL SERIES

0-200 PSI module for Pro Analog Transducer Box (original series).

Part# 810-MD-PT-200

$284.95

TRANSDUCER BOX MODULE, ORIGINAL SERIES

0-300 PSI module for Pro Analog Transducer Box (original series).

Part# 810-MD-PT-300

$284.95

TRANSDUCER BOX MODULE, ORIGINAL SERIES

0-400 PSI module for Pro Analog Transducer Box (original series).

Part# 810-MD-PT-400

$284.95

TRANSDUCER BOX MODULE, ORIGINAL SERIES

0-500 PSI module for Pro Analog Transducer Box (original series).

Part# 810-MD-PT-500

$284.95

TRANSDUCER BOX MODULE, ORIGINAL SERIES

0-600 PSI module for Pro Analog Transducer Box (original series).

Part# 810-MD-PT-600

$284.95

TRANSDUCER BOX MODULE, ORIGINAL SERIES

0-750 PSI module for Pro Analog Transducer Box (original series).

Part# 810-MD-PT-750

$284.95

TRANSDUCER BOX MODULE, ORIGINAL SERIES

Temperature module for Pro Analog Transducer Box (original series).

Part# 810-MD-TC-500

TRANSDUCER BOX MODULE, ORIGINAL SERIES

Fuel temperature module for Pro Analog Transducer Box (original series).

Part# 810-MD-TR-100

TRANSDUCER BOX MODULE, ORIGINAL SERIES

0-5 volt module for Pro Analog Transducer Box (original series). Supplies 5 volt power to the sensor.

Part# 810-MD-0-5VOUT

TRANSDUCER BOX MODULE, ORIGINAL SERIES

0-1000 PSI module for Pro Analog Transducer Box (original series).

Part# 810-MD-PT-1000

$284.95

TRANSDUCER BOX MODULE, SERIES II

Strain gauge module for Pro Transducer Box (Series II).

Part# 810-MD-SG2

$346.95

TRANSDUCER BOX MODULE, SERIES II

CAN adapter module to communicate with MSD PowerGrid through Pro Transducer Box (Series II).

Part# 810-MD-CAN2

TRANSDUCER BOX MODULE, SERIES II

Mag current module to monitor coil amperage using Pro Transducer Box (Series II).

Part# 810-MD-MAG2

TRANSDUCER BOX MODULE, SERIES II

Hall effect RPM input module for Pro Transducer Box (Series II).

Part# 810-MD-RPM2

TRANSDUCER BOX MODULE, SERIES II

0-5 volt module for Pro Transducer Box (Series II). Supplies either 5 or 12 volt power to the sensor.

Part# 810-MD-0-5V2

TRANSDUCER BOX MODULE, SERIES II

Battery voltage module for Pro Transducer Box (Series II).

Part# 810-MD-BATV2

TRANSDUCER BOX MODULE, SERIES II

0-15 PSI module for Pro Transducer Box (Series II).

Part# 810-MD-PT2-15

$284.95

TRANSDUCER BOX MODULE, SERIES II

0-60 PSI module for Pro Transducer Box (Series II).

Part# 810-MD-PT2-60

$284.95

TRANSDUCER BOX MODULE, SERIES II

Shift light module for Pro Transducer Box (Series II).

Part# 810-MD-SHIFT2

TRANSDUCER BOX MODULE, SERIES II

Zero crossing RPM input module for Pro Transducer Box (Series II).

Part# 810-MD-ZXRPM2

TRANSDUCER BOX MODULE, SERIES II

0-100 PSI module for Pro Transducer Box (Series II).

Part# 810-MD-PT2-100

$284.95

TRANSDUCER BOX MODULE, SERIES II

0-150 PSI module for Pro Transducer Box (Series II).

Part# 810-MD-PT2-150

$284.95

TRANSDUCER BOX MODULE, SERIES II

0-300 PSI module for Pro Transducer Box (Series II).

Part# 810-MD-PT2-300

$284.95

TRANSDUCER BOX MODULE, SERIES II

0-500 PSI module for Pro Transducer Box (Series II).

Part# 810-MD-PT2-500

$284.95

TRANSDUCER BOX MODULE, SERIES II

0-750 PSI module for Pro Transducer Box (Series II).

Part# 810-MD-PT2-750

$284.95

TRANSDUCER BOX MODULE, SERIES II

Vacuum module for Pro Transducer Box (Series II).

Part# 810-MD-PT2-VAC

$284.95

TRANSDUCER BOX MODULE, SERIES II

Temperature module for Pro Transducer Box (Series II).

Part# 810-MD-TC2-500

TRANSDUCER BOX MODULE, SERIES II

Fuel temperature module for Pro Transducer Box (Series II).

Part# 810-MD-TR2-300

UNIVERSAL EFI INTERFACE MODULE

The Universal EFI Interface Module streams CAN-based data from aftermarket ECU systems to Racepak's V-Net System.

Part# 230-VM-EFIUCAN

$404.95

V-NET 0-5, 12 VOLT MODULE

Part# 230-VM-AN-12V

$134.95

V-NET 0-5, 5 VOLT MODULE

Part# 230-VM-AN-5V

$134.95

V-NET 0-5V DIFFERENTIAL INPUT MODULE

This V-Net module is used to monitor any 5 volt reference sensor with an isolated ground to prevent inaccurate readings.

Part# 230-VM-5VDIFF

$175.95

V-NET 2-AXIS G-METER

The V-Net 2-Axis G-Meter adds lateral and acceleration g-force readings to any Racepak V-Net display or logger dash.

Part# 220-VP-GM2AXIS

$331.95

V-NET AIR FUEL MODULE

This V-Net module is used to adapt third-party air/fuel sensors into the Racepak system.

Part# 230-VM-AF

$175.95

V-NET BATTERY VOLTS MODULE

This module is used to monitor a 12 volt power source. Ideal for monitoring an isolated electrical source.

Part# 230-VM-BVOLT

$150.95

V-NET BLUETOOTH MODULE

This module communicates with Racepak's Virtual Dash App, turning your wireless device into a virtual IQ3 dash.

Part# 230-VM-DASHAPP

$205.95

220-VP-CLTEVENT

V-NET CLUTCH EVENT MODULE

Part# 220-VP-CLTEVENT

$134.95

V-NET CONTACT CLOSURE MODULE

Part# 230-VM-CC-1

$134.95

V-NET EGT MODULE 0-1800°F

Part# 230-VM-TC-EGT

$134.95

V-NET EVENT MARKER 12 VOLT

Part# 230-VM-EVENT

$134.95

V-NET EVENT MARKER SWITCH CLOSURE

Part# 230-VM-EVENTSW

$134.95

V-NET FLOW METER MODULE

Part# 230-VM-FLOW

$165.95

V-NET FLOW METER MODULE

Part# 230-VM-FLOWL

$165.95

V-NET FOUR CHANNEL ANALOG MODULE

This V-Net adapter module allows users to monitor 4 analog inputs from a Racepak transducer box (PN: 810-MB-08P).

Part# 230-VM-4ANA8

$150.95

V-NET LASER RIDE HEIGHT MODULE

This V-Net module connects the Laser Ride Height sensor (PN: 810-SN-RHB2) to any V-series recorder.

Part# 220-VM-RHB2LF

$160.95

V-NET LASER RIDE HEIGHT MODULE

This V-Net module connects the Laser Ride Height sensor (PN: 810-SN-RHB2) to any V-series recorder.

Part# 220-VM-RHB2LR

$160.95

V-NET LASER RIDE HEIGHT MODULE

This V-Net module connects the Laser Ride Height sensor (PN: 810-SN-RHB2) to any V-series recorder.

Part# 220-VM-RHB2RF

$160.95

V-NET LASER RIDE HEIGHT MODULE

This V-Net module connects the Laser Ride Height sensor (PN: 810-SN-RHB2) to any V-series recorder.

Part# 220-VM-RHB2RR

$160.95

V-NET PRESSURE MODULE

Replacement V-Net module pressure module.

Part# 230-VM-PT-5V

$134.95

V-NET SHAFT RPM HALL EFFECT - MODULE ONLY

Part# 230-VM-RPMHE

$134.95

V-NET SHAFT RPM ZX - MODULE ONLY

Part# 230-VM-ZX-1

$170.95

230-VM-SHIFTLTE

V-NET SHIFT LIGHT/EVENT MODULE

Part# 230-VM-SHIFTLTE

$206.95

V-NET TEMPERATURE 0-1800°F - MODULE ONLY

Part# 230-VM-TC-1800

$134.95

V-NET TEMPERATURE 0-300°F - MODULE ONLY

Part# 230-VM-TR-300

$134.95

V-NET TEMPERATURE 0-600°F - MODULE ONLY

Part# 230-VM-TC-600

$134.95

V-NET THROTTLE POSITION MODULE

Part# 230-VM-TPS

$134.95

V-NET TRANSBRAKE MODULE

Part# 220-VP-TBRAKE

$139.95

V-NET TRANSDUCER BOX II

Second generation Pro Analog Transducer Box . Plug-in style transducers and adapter modules must be purchased separately.

Part# 230-VM-4TD

$294.95

V-NET TURBO SHAFT SPEED - MODULE ONLY

This V-Net module can be used with Racepak's turbo shaft speed pickup (800-SS-TBRPM). Sensor sold separately.

Part# 230-VM-TBRPM

$170.95

V-NET TURBO SPEED - MODULE ONLY

V-Net Turbo Speed module.

Part# 230-VM-TURBO

$134.95

220-VP-WOTEVENT

V-NET WIDE OPEN THROTTLE EVENT MODULE

Part# 220-VP-WOTEVENT

$134.95

WARNING LIGHT MODULE

Warning light modules which activiate an LED style warning light. For use with the Pro III warning light module.

Part# 810-MD-WARNLT

Items 1 - 101 of 101

Sort By

Show per page

Page:

1

X

Ford 347 Giveaway

X

Ford 347 Giveaway