Skip to main content
Spring Cleaning Sale - Big Savings!
Motor Life Events Community Support
ASK OUR EXPERTS
1-866-464-6553
5
Images
Hooker BlackHeart

Hooker Blackheart Engine Mounting Brackets

1987-1995 Jeep Wrangler YJ with Gen III Hemi Engine Swap

Part # BHS523

Hooker Blackheart Engine Mounting Brackets

In Stock
Free Shipping - Lower 48 US States
$223.95
Add to Wishlist
Does it fit my vehicle?

Also Bought

Add some serious torque and power to your Jeep Wrangler YJ with a Gen III Hemi Engine Swap. These engine-mounting brackets are one part of a fully engineered swap system that provides maximum component clearances, ideal drivetrain geometry and clearance for swap headers & 3.00" high-tuck exhaust system. These engine mounts work together with the stock skid plate / transmission crossmember to mount the transmission & stock NP231J transfer case. The Gen III Hemi 5.7L factory truck oil pan & accessory drive system are recommended for this swap (these parts come on the donor engine when using the 2003-2008 5.7L Hemi truck engine). The 5.7L truck engine is an ideal engine choice for the Wrangler since it makes torque at a low RPM, right where it is needed for off-road use.

Features:

  • Add V8 Power & Torque to your 1987-1995 Jeep Wrangler YJ with a Gen III Hemi Engine Swap
  • Fits Jeeps that Came from the Factory with a 4 or 6-Cylinder Engine
  • Works with or Without a Body or Suspension Lift
  • Compatible with Gen III Hemi Truck Oil Pan
  • Maintains the Stock Passenger Side Engine Offset for Optimum Vehicle Component Compatibility
  • Works with Hooker BlackHeart Jeep Wrangler Swap Headers, Y-Pipe, and Exhaust System
  • Plate Steel Construction Provides Durable, Long-Term Mounting System
  • Raw Un-Painted Steel for Easy Welding & Strong Mounting Foundation
  • Engine Position Allows for Use of Electric or Mechanical Engine Cooling Fan
  • Works with Factory Skid Plate / Crossmember – Cost Savings since the Factory Part is reused
  • Manufacturer’s Limited Lifetime Warranty

About Hooker BlackHeart

Shop the official site of Hooker BlackHeart and explore exhaust systems, engine swap kits, and mufflers for both import and domestic vehicles at Holley.com!

Application1987-1995 Jeep Wrangler
Brand Hooker BlackHeart
Emission Code6
EngineChrysler Gen III Hemi
FinishRaw
MaterialSteel
Product TypeEngine Mounts
Transmission46RE
545 RFE
Type of ComponentEngine Mount Brackets
UPC090127109960
Part NumberBHS523
Instructions for Part# BHS523
1) Optimized for Use with 2003-2008 Dodge Ram 5.7L Hemi Truck Engine. 2) Fits Jeeps that Came from the Factory with 4 or 6-Cylinder Engines. 3) Body or Suspension Lift is not Required to Install These Mounting Brackets. 4) Designed Specifically for Use with Hooker Blackheart Headers, Y-pipe and Engine Swap Exhaust System for this Application. 5) Additional Hooker Blackheart Parts Required for Installation: BHS514 Engine Mount Clamshell for Gen-3 Hemi (2 required) 71221017HKR (red) or 71221016HKR (black) Poly Engine Mount Inserts (2 required) 71223015HKR Engine Mount Bolt Kit (1 required) Bare Steel, Weld-On Design. Requires Welding & Painting. Use BHS537 with 545RFE Transmission. 46RE Transmission can also be used, but will require a fabricated transmission-mounting bracket to attach it to the skid plate / crossmember.

We Suggest

*Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.