MENU

M-Series 600CFM Marine Carburetor-Factory Refurbished

-4160

Model

PART# FRM-600

Be the first to write a review

Not Available Online

This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.

Overview

This is an official QuickFuel Factory Refurbished Carburetor listing. Factory Refurbished carbs are NOT old worn-out carbs that have been rebuilt. They are brand new carbs that were returned under warranty. When these carbs are returned, we check them out and most of the time there is nothing wrong with them. Generally, they were simply adjusted out of working range by the installer. Since these carbs may show signs of a previous installation, our policy is not to sell them as new. Rather than scrapping them, we are making them directly available to the public. Not only does this help us control the costs of our new carbs, it allows you to get a great deal on a like-new carburetor! Factory Refurbished carbs have undergone a thorough inspection. Any damaged parts that would effect performance have been replaced and the carbs are solvent cleaned before being wet-flow-tested on Holley's state-of-the-art flow benches allowing them to be recalibrated to new carb specs. Factory Refurbished carbs may have scratches, blemishes, and other visual flaws from previous installation. Factory Refurbished Carburetors have limited availability. QFT brings its engineering expertise to the marine market. The M-Series feature billet-style metering blocks and throttle bodies for more precise performance and exceptional strength. •Exclusive Black Diamond coating for enhanced corrosion protection and appearance, coating provides a 6% reduction in fuel temperature •Electric choke - Fully adjustable, one wire hookup •J tubes to prevent spillage •PTFE-coated throttle shafts with PTFE bearing ribbons and stainless steel plates •Built-in sight glass windows for easy float adjustment •Changeable primary idle feed and power valve channel restrictions, plus changeable idle air and high speed bleeds •QuickLink™ secondary adjustment for fast and easy changing of opening rates •Available in eight different sizes from 350-1,050 cfm

Specs

Barrels4
Billet ColorDiecast-No Billet
BoosterDown Leg
BrandQuick Fuel
CFM600
ChokeElectric
Circuit2
Emission Code3
FinishBlack
FuelGasoline
Fuel SystemCarbureted
High Speed Air Bleed28
Idle Air Bleed Size73;39
Marine Engine SizeUniversal
MaterialAluminum
ModelMarine
Primary Main Jet67
Primary Power Valve65
Primary Pump Nozzle Size35
Product TypeFactory Refurbished Carburetor
SecondariesVacuum
Secondary Main Jet76
Supercharged ApplicationNo
Throttle Bore1-9/16 inch
WarrantyLimited 90 Day
Part NumberFRM-600

Service Parts

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle

Tech Resources

This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.

Warranty Information

Limited 90 Day: See Details
We Suggest
    Reviews

      *Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.

      Some parts are not legal for use in California or other states with similar regulations.