870 CFM Street Avenger - Aluminum Carburetor
Limited to Stock-Replaced by 0-81870
PART# 0-85870
Be the first to write a review
$538.00
Suggested Retail
$483.95 Your Price
$483.95 Your Price
Free Shipping
In Stock
Qty:
Add to Wish List
Starting at $43 a month with
Learn More
Overview
Holley's Street Avenger line of carburetors has a reputation for bolt-on-and-go performance. They have great features including a quick change vacuum secondary for easy fine tuning, optimized street calibrations, four vacuum ports for all vacuum accessories, built in fuel filter, and an included fuel line kit so you don't have to make multiple trips back to the parts store to get your hot rod back on the road.
These carbs share all of the same features that the Street Avenger series is known for, but now with a 36% savings in weight. Being aluminum also means they will hold their shine longer! Street Avengers are ready to run right out of the box, and now they are better than ever! Saving weight optimizes every aspect of performance of your car, whether it is acceleration, braking, or handling. What better place to start than the top of your engine?
Limited to stock. replaced by 0-81870
Features:
- Aluminum construction for maximum weight savings and long lasting shine
- Optimized street calibration that works-out-of-the-box
- Vacuum secondaries allow use on a wide variety of vehicles. Quick Change vacuum housing cap allows you to tune for performance or fuel economy (springs included)
- Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
- Fuel line kit included so there are no unnecessary trips back to the parts store
- Limited lifetime warranty - Guaranteed to be free from defects in material and workmanship for the life of the product!
- 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
- 36% weight savings
Specs
| Barrels | 4 |
|---|---|
| Booster | Straight |
| Brand | Holley |
| Carburetor Use | Street |
| CFM | 870 |
| Choke | Manual |
| Condition | New |
| Emission Code | 3 |
| Finish | Shiny |
| Fuel | Gasoline |
| Fuel Inlet | Dual |
| Marine Use | No |
| Material | Aluminum |
| Model | 4150 |
| Primary Main Jet | 78 |
| Primary Power Valve | 4.5 |
| Primary Pump Nozzle Size | 42 |
| Product Type | 4150 Model Carburetor |
| Secondaries | Vacuum |
| Secondary Main Jet | 82 |
| Supercharged Application | No |
| Throttle Bore | 1.750 inch |
| Vacuum Ports | 1 timed (spark) port, 2 full, and 1 PCV port |
| Warranty | Limited 1 Year Warranty |
| Part Number | 0-85870 |
Service Parts
![Inlet Needle - Viton]()
Inlet Needle Viton® Tip Adjustable 0.110" Seat Size (Viton® is a registered trademark of DuPont Performance Elastomers)$17.69Qty:![Fuel Bowl Gasket]()
For Model 2300™, Model 4150™, Model 4160™ and Model 4500™ Two Circuit Carburetors$11.48Qty:![GM AOD Kickdown Cable Bracket]()
Kickdown Cable Bracket For Use Only On Models 4150 & 4160 carburetors with 700R-4 transmissions.$27.65Qty:![Single-Stage Power Valve]()
![700R-4 KICKDOWN THROTTLE Bracket]()
![Metering Block Gasket]()
For Models 2300™, Model 4150™ Model 4160™ and Model 4500™ without Intermediate Circuit$11.48Qty:![Ford Trans. Hardware Kit]()
![Carburetor Throttle Cable Bracket]()
![Carburetor Standard Main Jet]()
![Trick Kit Carburetor Rebuild Kit]()
Trick Kit Carburetor Rebuild Kit Holley Vac. Sec. & Double Pump$138.95Qty:![Carburetor Standard Main Jet]()
![Universal Carb Installation Kit]()
Carburetor installation kit for square and spread bore carburetors$22.97Qty:![Renew Kit Carburetor Rebuild Kit]()
Renew Kit Carburetor Rebuild Kit Carburetor PN[0-80570/ 0-80870]$43.32Qty:![Carburetor Adapter Plate]()
![Weiand Street Warrior Intake - Chevy Small Block V8 - Black Ceramic]()
Street Warrior™ Intake Manifold non/EGR 262ci-400ci, 1955-1986 Cylinder Heads; Black Ceramic Coated Finish$230.95Qty:![Primary Metering Block, 0-80770]()
![Secondary Metering Block, 0-80770]()
Emissions
3
This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
The following vehicles are considered Racing Use Only Vehicles:
- Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
The following vehicles are considered Emissions Controlled Vehicles:
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicle
*Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.
