Skip to main content
ASK OUR EXPERTS
1-866-464-6553

Dinan Cold Air Intake - 2007-2010 BMW 135i/335i

Carbon Fiber - E82/E88/E90/E92/E93

Part # D760-0030 Be the first to write a review

Dinan Cold Air Intake - 2007-2010 BMW 135i/335i

7

Emissions

This part is legal under the provisions of EPAโ€™s Tampering Policy dated November 23rd, 2020.

See Emissions Details
As boost is increased through the use of performance software, the single factory intake becomes restrictive and the engine is lacking the air it needs to make maximum power. Our cold air intake force feeds the 3-liter turbocharged inline 6 with greater volumes of cool oxygen-rich air for substantial power gains by utilizing our secondary carbon fiber intake. The system is so effective that the carbon fiber inlet air temperature is a full 40 degrees Fahrenheit cooler than the incoming air from the stock inlet. Due to the increased airflow from our intake, the power-curve is extended into the higher RPMs for a noticeable change. The system is a direct replacement for the factory air box lid, employing a hand-crafted carbon fiber unit that also includes a secondary carbon fiber intake tube that captures cool air from the lower grill and includes the shielding for the conical filter to insulate it from power-robbing engine compartment heat.

Features:

  • More Power: Up to + 14 HP @ 6000 RPM, + 16 LB-FT @ 3400 RPM (coupled w/ engine software)
  • More Power: + 5 HP @ 6000 RPM, + 6 LB-FT @ 3400 RPM
  • Increased engine output across the power band
  • Carbon Fiber construction
  • Sealed system for maximum insulation from power robbing heat
  • Additional secondary inlet (and filter) for additional air flow
  • Less restrictive filter element for optimum flow (stock location)

About Dinan

Dinan knows European marques – quite literally – from the inside out. Whether you need hard parts such as exhaust systems or coilovers, or ECU upgrades to unlock your engine's potential, Dinan has the parts to take your BMW, Mercedes-Benz, or Mini to the next level.

Air Box IncludedYes
Brand Dinan
Clearance CategoryAir and Fuel Delivery
Dinan Point Value3
Discount PercentageOver 75%
Emission Code7
Height7
Labor Time (Hours)2
Length29
Max HP Gain14 @ 6000 RPM
Max Torque (lb-ft) Gain16 @ 3400 RPM
Product TypeCold Air Intake
Sale CategoryAir and Fuel Delivery
Weight11
Width17
UPC813725022079
Part NumberD760-0030
7

This part is legal under the provisions of EPAโ€™s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
"Not compatible with vehicles equipped with the M aerodynamic bumper.
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.