Skip to main content
ASK OUR EXPERTS
1-866-464-6553

2013-2015.5 Ford Coyote Ti-VCT HP EFI Kit, NTK O2, USCAR INJ

Ford Coyote Ti-VCT HP EFI ECU and Ti-VCT Controller Kit with Power Harness, Main Harness, Coil Harness, Injector Harness and Sensors includes NTK Oxygen Sensor

Part # 550-625N Be the first to write a review

2013-2015.5 Ford Coyote Ti-VCT HP EFI Kit, NTK O2, USCAR INJ

In Stock
Free Shipping - Lower 48 US States
$3,767.95
Add to Wishlist
Starting at $332 a month with Learn More
3

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

See Emissions Details
Introducing Coyote Twin Independent Variable Cam Timing Control from Holley EFI! Do you have a coyote crate engine going in your dream car? Is your weekend road race warrior powered by a coyote junkyard engine with locked cams? Unlock the full potential of your high revving power plant with the Holley EFI Plug and Play Coyote Ti-VCT Control Module.

Features:

  • Now supports 2013-2015.5 Coyote engines
  • HP EFI kits available
  • Plug and Play main harness for 2013-2015.5 Coyote engines w/ stock cam shafts using stock coils (558- 110)
  • Plug and Play main harness for 2013-2015.5 Coyote engines w/ stock cam shafts using Holley EFI coils (558-122)
  • Compatible with HP or Dominator EFI
  • Pre-calibrated Ford sensor drop downs in the Holley EFI software
  • Ti-VCT Cam control down to 400 RPM
  • Commanded timing matched within 1 degree
  • User programmable tables enable the end user to fine tune aftermarket Ti-VCT compatible camshafts
  • 4 Built in Diagnostic LEDS make diagnostics easy in the event of a cam or crank sensor failure
  • Integrated stock cam position tables – eliminate tuning guess work, optimal drive-ability and power right out of the box
  • Main harnesses come terminated with Ford TPS and IAC connectors, making it easy to convert from a DBW throttle body to a manual throttle body.
  • Installation of an external MAP sensor is required, we recommend part number 538-13 for N/A applications
  • Main Harnesses includes a Power Tap Connector, as a convenient source for power and grounds when adding additional sensors or actuators
  • CANBus communication between Coyote Ti-VCT and Holley EFI ECU for high speed data transfer and diagnostics

About Holley EFI

Find standalone EFI for LS, Coyote, Hemi and more at Holley.com. From engine swapping to managing up to 4000 horsepower, we have a solution for every project!

Brand Holley EFI
Emission Code3
Harness ApplicationFord
Harness TypeIgnition
Ignition TypeFord Coyote
Injector ConnectorUSCAR (EV6)
Product TypeECU Assembly
UPC090127030257
Part Number550-625N
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.


The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle


WARNING: It is against the law to install this part on an Emissions Controlled Vehicle


The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
Designed to be used with a cable driven throttle body.
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.