MENU
How To Choose a Circle Track IgnitionYouTube Button

Pro Mag 12LT Generator, Short, Red

Supplied with a bronze gear, band clamp, cap and rotor.

PART# 79081

Be the first to write a review
$2,099.95   Suggested Retail
$1,700.96   Holleydays Price
Free Shipping
In Stock  
Qty: 
Add to Wish List

Starting at $150 a month with Learn More
MSD Pro Mag 12 LT PN 79081 and PN 79082 are designed to work in RAISED CAM ENGINE BLOCKS using a DRY SUMP OILING SYSTEM only. They will work in engine blocks with 50mm, 55mm and 60mm cam tunnels. Installation of PN 79081 or PN 79082 in any other application is not recommended and can result in engine damage. If you have any questions or your engine does not fit the criteria please contact MSD Technical Support at (915) 855-7123 for information and the correct part number for your application.

Overview

Designed with Sprint cars in mind, the Pro-Mag 12LT is almost 30% lighter than the original Pro-Mag, but still produces the same incredible power. The compact housing sits an inch lower for improved clearance of the fuel injection, and it features a band clamp mount for easier timing adjustments. MSD has also designed a cap and rotor specifically for the 12LT series. The cap is injection molded from DuPont Rynite material, which possesses high dielectric properties and incredible strength. The innovative rotor design clamps to the shaft with a retaining bolt assembly and is also molded from Rynite. Note: A 12LT Generator cannot be upgraded to a 20 Amp Pro-Mag.

Specs

BrandPro Mag
Emission Code4
Product TypeMagneto
Part Number79081

Service Parts


Emissions

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

Tech Resources

MSD Pro Mag 12 LT PN 79081 and PN 79082 are designed to work in RAISED CAM ENGINE BLOCKS using a DRY SUMP OILING SYSTEM only. They will work in engine blocks with 50mm, 55mm and 60mm cam tunnels. Installation of PN 79081 or PN 79082 in any other application is not recommended and can result in engine damage. If you have any questions or your engine does not fit the criteria please contact MSD Technical Support at (915) 855-7123 for information and the correct part number for your application.
We Suggest
    Reviews

      *Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.

      Some parts are not legal for use in California or other states with similar regulations.

       X  Holleydays