Skip to main content

Holley Single Plane EFI Split-Design Race Intake Manifold- GM LS3/L92- Black

EFI single plane split-design race intake manifold. Fits all GM LS Gen III or IV engines equipped with LS3/L92 cylinder heads

Part # 300-290BK Be the first to write a review

Holley Single Plane EFI Split-Design Race Intake Manifold- GM LS3/L92- Black

Estimated Ship Date: 03/20/2025
Find Similar In-Stock Items
Free Shipping - Lower 48 US States
MSRP $780.95
$623.95
Save $157.00
Add to Wishlist
Notify Me When Available

3

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

See Emissions Details
The new Holley Single-Plane Race intake manifold were designed with performance in mind. They feature a race bred, two piece split feature that was previously only found on the most expensive race intakes. The manifold will fit GM LS Gen III engines with LS3/L92 heads and are intended for 4150 style square bore flanged carburetors or throttle body EFI. The LS Race single-plane intake manifold was designed for hi-performance/racing engine applications, 5.3 to 6.2+ liter displacement, and maximum engine speeds of 6000-7000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the RPM spectrum while providing maximum performance up to 7000 rpm. The Holley LS Race manifold incorporates a split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap. With shoulder bolt locators and O-ring seal, reassembly is simple and precise. Technical Data: ๏‚ท A-B Height - 7.20" (0ยฐ carb flange angle) ๏‚ท Port Size- 2.59" Height x 1.28" Wide ๏‚ท Throttle Body Flange - Standard 4150 for up to 1-3/4" diameter throttle bores ๏‚ท As-Cast Runner Cross-Sectional Area - 4.5 inยฒ at the runner entry tapered to 3.2 inยฒ at the flange exit

Features:

  • Maximum performance race design with hood clearance consideration
  • Lighter than other split race intakes
  • Split feature making porting efforts easy!
  • 33 to 50% the price of other split race intakes
  • Captured O-ring seals at head ports and split
  • Vacuum Port options include (2) 1/8, (1) 1/4, and (1) 3/8, NPT ports at the carb flange
  • Billet Fuel Rails and rail mounting hardware included.

About Holley

Holley Performance Brands is the undisputed leader in carburetors, fuel pumps, fuel injection, intake manifolds, fuel injection, and fuel systems.

Barrels4
Basic Operating RPM Range3500-8000 R3
Brand Holley
Carburetor FlangeSquare/4150
Carburetor Studs IncludedNo
CategoryEngine
ColorBlack
ConstructionCast
EGR PortNo
Emission Code3
EngineGM LS3/L92
FinishBlack
Flange Style4150 Square Bore
Front Height7.32"
Front Maximum Height7.32 IN
Fuel Injectors IncludedNo
Fuel Rail(s) IncludedNo
Fuel System TypeEFI
Gasket Or Seal IncludedNo
Grade TypePerformance
Intake Port Gasket(s) IncludedNo
Manifold TypeSplit Single Plane
MaterialAluminum
Nitrous Bung(s) IncludedNo
Part TypeEngine Intake Manifold
Plenum FinishBlack
Product TypeIntake Manifold
Rear Height7.32"
Rear Maximum Height7.32 IN
Recommended UseForced Induction
Removable RunnersNo
RPM Power Band3500-8000 RPM
Single Or Dual Plane TypeSingle Plane
Sub CategoryCylinder Block Components
Throttle Body IncludedNo
WarrantyLimited 90 Day
UPC090127065709
Part Number300-290BK
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.


The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle


WARNING: It is against the law to install this part on an Emissions Controlled Vehicle


The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
Two different length fuel rail bracket sets are included; the long brackets are for mounting the fuel rails at a height for Bosch style EV1 type fuel injectors. The short brackets are for mounting the fuel rails at a height for GM OE LS7 fuel injectors. When using the OE GM LS7 injector, the O-ring on the outlet (intake manifold) end of the injector must be changed to the O-ring supplied in the short bracket pack.
Limited 90 Day: See Details
Reviews

    Your Review

    *Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.