Sniper HyperSpark Ignition

  • 1. White Wire - Connect the loose points output wire from your HyperSpark ignition box to the white wire on the Sniper 10-pin connector.
  • 2. Pink Wire – Connect the HyperSpark distributor’s pink switched 12-volt wire and 7-pin Sniper connector’s pink wire to switched 12-volts.
  • 3. Red Wire – Small gauge red wire located on the two-pin HyperSpark ignition box harness can be tied to a clean switched 12-volt source with the wires in point two.
  • 4. Thick Black Wire – Connect from the HyperSpark ignition box directly to the negative battery post.
  • 5. Thick Red Wire - Connect from the HyperSpark ignition box directly to the positive battery post.
  • Holley EFI x
  • Filter
  • Clear
  • In Stock
Product Type
  • Distributor
  • Distributor Cap
  • Ignition Boxes
  • Ignition Coil
  • Sniper EFI Main Harness
  • Black
  • Clear
  • Shiny
  • Silver and Black
Items 1 - 71 of 71 Items
    1. 1

    Four Wires to EFI With Sniper and Hyperspark Master Kits!

    Holley Sniper EFI HyperSpark Ignition Systems

    • Designed to be plug and play with Sniper EFI Systems
    • Hall Effect crank trigger sensor in a billet distributor housing provides a noise free RPM signal to the Sniper ECU
    • Patented Clear Installation Cap makes phasing the distributor virtually fool proof
    • Pre-Terminated Ignition coil connector removes any doubt of loose connections at the Ignition Coil
    • HyperSpark CD Ignition box is sealed and powder coated to be installed in the harshest of locations
    • External LED on HyperSpark CD Ignition box helps verify 12v, cranking RPM, and low battery voltage
    • The HyperSpark ignition coil comes with an integrated mounting bracket, making installation hassle free
    • Perfect for anyone wanting to add timing control to their Sniper EFI Installation
    • Timing Control Improves Idle stability, throttle response, fuel economy and Wide Open Throttle Horsepower!

    Back To Top

    Sniper HyperSpark Ignition

    Introducing HyperSpark Ignition, from Sniper EFI. Designed with one goal, to easily add Ignition timing control to nearly any Sniper EFI installation.