ASK OUR EXPERTS: 1-866-464-6553
 
MENU
Search
1-866-464-6553
 Larger Image
FR-1850S - Holley 0-1850S 600CFM ALUMINUM 4bbl Carb Manual Choke Factory Refurbished - default Image
FR-1850S - Holley 0-1850S 600CFM ALUMINUM 4bbl Carb Manual Choke Factory Refurbished - additional Image
FR-1850S - Holley 0-1850S 600CFM ALUMINUM 4bbl Carb Manual Choke Factory Refurbished - additional Image
FR-1850S - Holley 0-1850S 600CFM ALUMINUM 4bbl Carb Manual Choke Factory Refurbished - additional Image
FR-1850S - Holley 0-1850S 600CFM ALUMINUM 4bbl Carb Manual Choke Factory Refurbished - additional Image
FR-1850S - Holley 0-1850S 600CFM ALUMINUM 4bbl Carb Manual Choke Factory Refurbished - additional Image
FR-1850S - Holley 0-1850S 600CFM ALUMINUM 4bbl Carb Manual Choke Factory Refurbished - additional Image

Holley 0-1850S 600CFM ALUMINUM 4bbl Carb Manual Choke Factory Refurbished

Street Warrior comes standard with Manual Choke, Vacuum Secondaries, and a new integrated 700R4/200R4 compatible throttle lever. -4160

?
CFM
?
Choke

PART# FR-1850S

Be the first to write a review

Not Available Online

Holley Carburetor Selector
This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.

Overview

This is an official Holley Performance Factory Refurbished Carburetor listing. Factory Refurbished carbs are NOT old worn-out carbs that have been rebuilt. They are carbs that were returned under warranty. When these carbs are returned, we check them out and most of the time there is nothing wrong with them. Generally, they were simply adjusted out of working range by the installer. Since these carbs may show signs of a previous installation, our policy is not to sell them as new. Rather than scrapping them, we are making them directly available to the public. Not only does this help us control the costs of our new carbs, it allows you to get a great deal on a carburetor! Factory Refurbished carbs have undergone a thorough inspection. Any damaged parts that would effect performance have been replaced and the carbs are solvent cleaned before being wet-flow-tested on Holley's state-of-the-art flow benches allowing them to be recalibrated to new carb specs. Factory Refurbished carbs may have scratches, blemishes, and other visual flaws from previous installation. Factory Refurbished Carburetors have limited availability. Replaces Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern.

Features:

  • Vibratory polished for good looks and long lasting shine
  • Performance upgrade for stock to mildly modified vehicles
  • Universal calibration for easy bolt-on performance
  • Manual choke (cable actuated - hand controlled) for precise cold start control
  • Vacuum secondaries for use on wide variety of vehicles. Compensate for all vehicle weights, gearing & transmissions to allow smooth opening of secondaries.
  • Single feed fuel inlet for easy installation
  • Integrated 700R4/200R4 transmission kick down cable mounting
  • Power valve blow-out protection
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
  • Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.

Specs

Barrels4
Billet ColorNone
BoosterStraight
BrandHolley
CFM600
ChokeManual
Circuit2
Emission Code3
FinishShiny
FuelGasoline
Fuel InletSingle
MaterialAluminum
Model4160
Primary Main Jet66
Primary Power Valve6.5
Primary Pump Nozzle Size31
Product TypeFactory Refurbished Carburetor
SecondariesVacuum
Supercharged ApplicationNo
Throttle Bore1.563 inch
WarrantyLimited 90 Day
Part NumberFR-1850S

Service Parts


Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle

Tech Resources

Holley Carburetor Selector
Instructions for Part# 0-1850S
Carburetor Numerical Listing for Part# 0-1850S
Quickstart Guide for Part# 0-1850S
This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.

Warranty Information

Limited 90 Day: See Details
We Suggest
    Also Bought
      Reviews

        *Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.

        Some parts are not legal for use in California or other states with similar regulations.