Overview
The 0-3310S is a shiny aluminum version of the classic 0-3310 - a hot rod staple for over four decades! Dual feed fuel inlets assure you get all the fuel you need while its vacuum secondaries and manual choke make it amazingly universal. The famed 0-3310 is one of ten inaugrual inductees into the Hot Rod Magazine Speed Parts Hall of Fame! Its well known performance calibration and 750 CFM airflow keep it on top still today. Don't trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60's.
This is an official Holley Performance Factory Refurbished Carburetor.
Factory Refurbished carbs are NOT old worn-out carbs that have been rebuilt. They are carbs that were returned under warranty. When these carbs are returned, we check them out and most of the time there is nothing wrong with them. Generally, they were simply adjusted out of working range by the installer.
Since these carbs may show signs of a previous installation, our policy is not to sell them as new. Rather than scrapping them, we are making them directly available to the public. Not only does this help us control the costs of our new carbs, it allows you to get a great deal on a like-new carburetor!
Factory Refurbished carbs have undergone a thorough inspection. Any damaged parts that would effect performance have been replaced and the carbs are solvent cleaned before being wet-flow-tested on Holley's state-of-the-art flow benches allowing them to be recalibrated to new carb specs. Factory Refurbished carbs may have scratches, blemishes, and other visual flaws from previous installation.
Factory Refurbished Carburetors have limited availability.
Features:
- Vibratory polished for good looks
- Performance upgrade for stock to mildly modified vehicles
- Universal calibration for easy bolt-on performance
- Manual choke (cable actuated - hand controlled) for precise cold start control
- Vacuum secondaries for use on wide variety of vehicles. Compensate for all vehicle weights, gearing & transmissions to allow smooth opening of secondaries.
- Dual feed fuel inlets for constant high volume fuel delivery
- Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
- Power valve blow-out protection
- 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
Specs
| Barrels | 4 |
|---|---|
| Billet Color | None |
| Booster | Straight |
| Brand | Holley |
| CFM | 750 |
| Choke | Manual |
| Circuit | 2 |
| Emission Code | 3 |
| Finish | Shiny |
| Fuel | Gasoline |
| Fuel Inlet | Dual |
| Material | Aluminum |
| Model | 4160 |
| Primary Main Jet | 72 |
| Primary Power Valve | 6.5 |
| Primary Pump Nozzle Size | 31 |
| Product Type | Factory Refurbished Carburetor |
| Secondaries | Vacuum |
| Supercharged Application | No |
| Throttle Bore | 1.688 inch |
| Warranty | Limited 90 Day |
| Part Number | FR-3310S |
Service Parts
![Inlet Needle - Viton]()
Inlet Needle Viton® Tip Adjustable 0.110" Seat Size (Viton® is a registered trademark of DuPont Performance Elastomers)$16.83Qty:![Fuel Bowl Gasket]()
For Model 2300™, Model 4150™, Model 4160™ and Model 4500™ Two Circuit Carburetors$10.93Qty:![Single-Stage Power Valve]()
![GM AOD Kickdown Cable Bracket]()
Kickdown Cable Bracket For Use Only On Models 4150 & 4160 carburetors with 700R-4 transmissions.$26.31Qty:![700R-4 KICKDOWN THROTTLE Bracket]()
![Metering Block Gasket]()
For Models 2300™, Model 4150™ Model 4160™ and Model 4500™ without Intermediate Circuit$10.93Qty:![Renew Kit Carburetor Rebuild Kit]()
Renew Kit Carburetor Rebuild Kit Model Number 4160 750 cfm.$31.28Qty:![Ford Trans. Hardware Kit]()
![Carburetor Standard Main Jet]()
![Choke Control Cable]()
![Fuel Line]()
Fuel Line Chrome For Holley Model 4160 Carburetor 5/8-18 inverted flare inlet. 8-21/32" center to center.$38.94Qty:![Trick Kit Carburetor Rebuild Kit]()
Trick Kit Carburetor Rebuild Kit Holley Vac. Sec. & Double Pump$131.95Qty:![Carburetor Throttle Cable Bracket]()
![Metering Block Gasket]()
![Universal Carb Installation Kit]()
Carburetor installation kit for square and spread bore carburetors$21.86Qty:![Quickchange Vacuum Secondary Housing Cover]()
![Secondary Metering Plate Gasket]()
![Replacement Fuel Bowl Kit]()
Replacement primary center hung Fuel Bowl Kit For Use w/model 4160, 4150, and 2300 (0-4412) series carburetors with center hung bowls. Excluding model 4165. Standard finish$79.06Qty:![Carburetor Adapter Plate]()
![Throttle Body Kit, 0-4779]()
![Replacement Fuel Bowl Kit]()
Replacement Fuel Bowl Kit Secondary Bowl Center Hung Float Style w/Fuel Inlet Provision Only$53.85Qty:![Secondary Metering Block Conversion Kit]()
Conversion Kit for 0-3310S and most 4160 Carburetors with center hung fuel bowls$58.43Qty:![Secondary Metering Plate]()
Secondary Metering Plate Main Hole 0.081 Idle Hole 0.040$36.66Qty:![METERING BLOCK]()
Emissions
This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
The following vehicles are considered Racing Use Only Vehicles:
- Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
The following vehicles are considered Emissions Controlled Vehicles:
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicle
*Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.
