Skip to main content
Iconic Heritage - 10% Off Thousands of products
Motor Life Events Community Support
Videos
Holley

Holley Aluminum Street HP Carburetor - Factory Refurbished

Part # FR-82651SA
1 Review

650 CFM - 4150 - Mechanical Secondaries - Shiny - Gasoline

Holley Aluminum Street HP Carburetor - Factory Refurbished

Currently Not Available

3

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

See Emissions Details

Also Bought

This is an official Holley Performance factory refurbished carburetor. Factory refurbished carbs are not old worn-out carbs that have been rebuilt. They are carbs that were returned under warranty. When these carbs are returned, we check them out and most of the time there is nothing wrong with them. Generally, they were simply adjusted out of working range by the installer. Since these carbs may show signs of a previous installation, our policy is not to sell them as new. Rather than scrapping them, we are making them directly available to the public. Not only does this help us control the costs of our new carbs, it allows you to get a great deal on a carburetor! Factory refurbished carbs have undergone a thorough inspection. Any damaged parts that would affect performance have been replaced and the carbs are solvent cleaned before being wet-flow-tested on Holley's state-of-the-art flow benches allowing them to be recalibrated to new carb specs. Factory refurbished carbs may have scratches, blemishes, and other visual flaws from previous installation. Any defective items will be repaired or replaced at Holley's discretion.

Features:

  • Aluminum construction for weight savings and long lasting good looks
  • Optimized street/strip calibration for outstanding throttle response and drivability
  • Contoured venturi inlet offers balanced airflow for increased horsepower
  • Screw in air bleeds for precision tuning capabilities
  • Four corner idle for precise idle control
  • Mechanical secondaries for awesome tire turning performance
  • Dual accelerator pumps for additional fuel under initial acceleration
  • Dual feed fuel inlets for constant high volume fuel delivery
  • Available in 650, 750, 850, and 950 CFM versions
  • Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
  • Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.

About Holley

Holley Performance Brands is the undisputed leader in carburetors, fuel pumps, fuel injection, intake manifolds, fuel injection, and fuel systems.

Barrel Quantity4
Barrels4
Body ColorPolished Aluminum
Body FinishPolished
Body MaterialAluminum
BoosterStraight
Booster DesignStraight
Brand Holley
Carburetor MaterialAluminum
CategoryAir and Fuel Delivery
CFM Rating650
ChokeNone
Choke TypeNone
ColorPolished Aluminum
ConditionFactory Refurbished
Cubic Feet Per Minute Rating650
Emission Code3
FinishPolished
Flange ShapeSquare
Flange TypeSquare/4150
FuelGasoline
Fuel TypeGasoline
Gasket Or Seal IncludedYes
Grade TypePerformance
Linkage AttachedYes
Marine ApprovedNo
MaterialAluminum
Model4150
Mounting Hole Quantity4
Part TypeCarburetor
Primary Jet Diameter69
Primary Main Jet Size69
Primary Power Valve6.5
Primary Pump Nozzle Size28
Product TypeFactory Refurbished Carburetor
Secondary Barrel TypeMechanical
Secondary Jet Diameter75
Secondary Main Jet Size75
Secondary Pump Nozzle Size29
Spacer IncludedNo
Street LegalYes
Sub CategoryCarburetion
Supercharger CompatibleNo
Throttle Bore Diameter1.688 inch
Venturii Size1.250 inch
WarrantySold As-is
UPC090127008805
Part NumberFR-82651SA
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.


The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle


WARNING: It is against the law to install this part on an Emissions Controlled Vehicle


The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
Instructions - 199r10950.pdf
Instructions - techlibrary_carb_numerical_listing.pdf
Instructions - 199R10437.pdf
We have limited stock on this part and on rare occasion receive more orders that can be filled.  If the part is oversold, backorders will be canceled and all payments will be refunded.
Sold As-is: See Details

We Suggest

Recently Viewed Items
Holley
Aluminum Street HP Carburetor - Factory Refurbished
650 CFM - 4150 - Mechanical Secondaries - Shiny - Gasoline
Part# FR-82651SA
$460.95
Holley
Spreadbore Carburetor - Factory Refurbished
650 CFM - 4175 - Vacuum Secondaries - Gold Dichromate - Gasoline
Part# FR-80555C
$499.95
Brawler
850 CFM Brawler Street Carburetor Mechanical Secondary-Factory Refurbished
850 CFM - 4150 - Mechanical Secondaries - Black - Gasoline
Part# FRBR-67314
$473.95
Quick Fuel Technology
M-Series 750CFM Marine Carburetor-Factory Refurbished
750 CFM - 4160 - Mechanical Secondaries - Black - Gasoline
Part# FRM-750
$649.95
Reviews
1

5 out of 5 stars

  • 5 star

    100%

  • 4 star

    0%

  • 3 star

    0%

  • 2 star

    0%

  • 1 star

    0%

Your Review

Items 1 - 1 of 1
  per page
Page:
  1. 1
Items 1 - 1 of 1
  per page
Page:
  1. 1

*Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.