Home /
Air & Fuel Delivery /
Carburetors /
Factory Refurbished Carburetors /
Holley Aluminum Street HP Carburetor - Factory Refurbished

Holley

Holley Aluminum Street HP Carburetor - Factory Refurbished

Part # FR-82751SA Be the first to write a review

750 CFM - 4150 - Mechanical Secondaries - Shiny - Gasoline

Currently Not Available

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

See Emissions Details

This is an official Holley Performance factory refurbished carburetor. Factory refurbished carbs are not old worn-out carbs that have been rebuilt. They are carbs that were returned under warranty. When these carbs are returned, we check them out and most of the time there is nothing wrong with them. Generally, they were simply adjusted out of working range by the installer. Since these carbs may show signs of a previous installation, our policy is not to sell them as new. Rather than scrapping them, we are making them directly available to the public. Not only does this help us control the costs of our new carbs, it allows you to get a great deal on a carburetor! Factory refurbished carbs have undergone a thorough inspection. Any damaged parts that would affect performance have been replaced and the carbs are solvent cleaned before being wet-flow-tested on Holley's state-of-the-art flow benches allowing them to be recalibrated to new carb specs. Factory refurbished carbs may have scratches, blemishes, and other visual flaws from previous installation. Any defective items will be repaired or replaced at Holley's discretion.

Features:

Aluminum construction for weight savings and long lasting good looks
Optimized street/strip calibration for outstanding throttle response and drivability
Contoured venturi inlet offers balanced airflow for increased horsepower
Screw in air bleeds for precision tuning capabilities
Four corner idle for precise idle control
Mechanical secondaries for awesome tire turning performance
Dual accelerator pumps for additional fuel under initial acceleration
Dual feed fuel inlets for constant high volume fuel delivery
Available in 650, 750, 850, and 950 CFM versions
Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing
100% wet-flow tested by Holley technicians to assure it arrives ready to run!
Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.

About Holley

Holley Performance Brands is the undisputed leader in carburetors, fuel pumps, fuel injection, intake manifolds, fuel injection, and fuel systems.

Barrel Quantity	4
Barrels	4
Body Color	Polished Aluminum
Body Finish	Polished
Body Material	Aluminum
Booster	Downleg
Booster Design	Downleg
Brand	Holley
Carburetor Material	Aluminum
Category	Air and Fuel Delivery
CFM Rating	750
Choke	None
Choke Type	None
Color	Polished Aluminum
Condition	Factory Refurbished
Cubic Feet Per Minute Rating	750
Emission Code	3
Finish	Polished
Flange Shape	Square
Flange Type	Square/4150
Fuel	Gasoline
Fuel Type	Gasoline
Gasket Or Seal Included	Yes
Grade Type	Performance
High Speed Air Bleed	36
Idle Air Bleed Size	71
Linkage Attached	Yes
Marine Approved	No
Material	Aluminum
Model	4150
Mounting Hole Quantity	4
Part Type	Carburetor
Primary Jet Diameter	77
Primary Main Jet Size	77
Primary Power Valve	4.5
Primary Pump Nozzle Size	31
Product Type	Factory Refurbished Carburetor
Secondary Barrel Type	Mechanical
Secondary Jet Diameter	84
Secondary Main Jet Size	84
Secondary Pump Nozzle Size	28
Spacer Included	No
Street Legal	Yes
Sub Category	Carburetion
Supercharger Compatible	No
Throttle Bore Diameter	1.688 inch
Venturii Size	1.375 inch
Warranty	Sold As-is
UPC	090127008829
Part Number	FR-82751SA

Carburetor Throttle Ball Assortment
Throttle Ball Assortment Pack
Part# 20-2
$19.90
Qty:
Fuel Bowl Gasket
For Model 2300™, Model 4150™, Model 4160™ and Model 4500™ Two Circuit Carburetors
Part# 108-83-2
$14.65
Qty:
Transmission Kickdown Stud
Transmission Kickdown Stud
Part# 20-40
$12.02
Qty:
GM AOD Kickdown Cable Bracket
Kickdown Cable Bracket For Use Only On Models 4150 & 4160 carburetors with 700R-4 transmissions.
Part# 20-95
$36.70
Qty:
Holley 700R4 Kickdown Throttle Bracket
Kickdown Bracket for 700R4
Part# 20-121
$36.70
Qty:
Carburetor Throttle Stud
Throttle Cable Stud 1/4" Diameter
Part# 20-38
$10.94
Qty:
Carburetor Throttle Lever Extension
Carburetor Throttle Lever Extension Readily Accepts Chrysler Throttle Lever Stud for Simple Throttle Hookup
Part# 20-7
$16.38
Qty:
Inlet Needle - Viton
Inlet Needle Viton® Tip Adjustable 0.110" Seat Size (Viton® is a registered trademark of DuPont Performance Elastomers)
Part# 6-504
$26.20
Qty:
Metering Block Gasket
For Models 2300™, Model 4150™ Model 4160™ and Model 4500™ without Intermediate Circuit
Part# 108-89-2
$15.33
Qty:
Chrome Fuel Filter
Street/Strip Carbureted Applications Post Filter Universal fit for 3/8" fuel line
Part# 162-523
$22.28
Qty:
Single-Stage Power Valve
Single-Stage Power Valve Standard Flow 4.5 in. Hg
Part# 125-45
$15.33
Qty:
Carburetor Throttle Stud
Throttle and Cruise Control Stud for Chrysler Applications
Part# 20-67
$41.07
Qty:
Trick Kit Carburetor Rebuild Kit
Trick Kit Carburetor Rebuild Kit Holley Vac. Sec. & Double Pump
Part# 37-933
$192.55
Qty:
Renew Kit Carburetor Rebuild Kit
Renew Kit Carburetor Rebuild Kit Model Number 4150 and 4500
Part# 37-1539
$192.55
Qty:
Carburetor Standard Main Jet
Standard Main Jet, 1/4-32 Thread, .099" Jet size
Part# 122-84
$13.22
Qty:
Carburetor Standard Main Jet
Standard Main Jet, 1/4-32 Thread, .086" Jet size
Part# 122-77
$13.22
Qty:

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

1965 and older U.S. manufactured California Certified vehicles
1967 and older U.S. manufactured Federally Certified vehicles
1967 and older Foreign manufactured vehicle

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

The following vehicles are considered Emissions Controlled Vehicles:

1966 and newer U.S. manufactured California Certified vehicles
1968 and newer U.S. manufactured Federally Certified vehicles
1968 and newer Foreign manufactured vehicle

Instructions - 199r10950.pdf

Instructions - techlibrary_carb_numerical_listing.pdf

Instructions - 199R10437.pdf

We have limited stock on this part and on rare occasion receive more orders that can be filled. If the part is oversold, backorders will be canceled and all payments will be refunded.

Sold As-is: See Details

Reviews

Your Review

Title

Review

Photos

*Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.

Holley Aluminum Street HP Carburetor - Factory Refurbished

Holley Aluminum Street HP Carburetor - Factory Refurbished

Emissions

Also Bought

Features:

We Suggest

Be the first to write a review

Your Review