Overview
This is an official Holley Performance Factory Refurbished Carburetor listing.
Factory Refurbished carbs are NOT old worn-out carbs that have been rebuilt. They are brand new carbs that were returned under warranty. When these carbs are returned, we check them out and most of the time there is nothing wrong with them. Generally, they were simply adjusted out of working range by the installer.
Since these carbs may show signs of a previous installation, our policy is not to sell them as new. Rather than scrapping them, we are making them directly available to the public. Not only does this help us control the costs of our new carbs, it allows you to get a great deal on a like-new carburetor!
Factory Refurbished carbs have undergone a thorough inspection. Any damaged parts that would effect performance have been replaced and the carbs are solvent cleaned before being wet-flow-tested on Holley's state-of-the-art flow benches allowing them to be recalibrated to new carb specs. Factory Refurbished carbs may have scratches, blemishes, and other visual flaws from previous installation.
Factory Refurbished Carburetors have limited availability.
Features:
- Features a tumble polished finish - can also be hand polished
- Optimized street calibration that works-out-of-the-box
- Factory preset electric choke for easy startups
- Glass fuel level sight windows for easy, safe float adjustments
- Vacuum secondaries allow use on a wide variety of vehicles. Quick Change vacuum housing cap allows you to tune for performance or fuel economy (springs included)
- 4 corner idle allows you to precisely control your idle system
- Aluminum construction for a 44% weight savings
- Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
- Fuel line kit included so there are no unnecessary trips back to the parts store
- 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
Specs
| Barrels | 4 |
|---|---|
| Booster | Straight |
| Brand | Holley |
| CFM | 770 |
| Choke | Electric |
| Condition | Factory Refurbished |
| Emission Code | 3 |
| Finish | Shiny |
| Fuel | Gasoline |
| Fuel Inlet | Dual |
| Marine Use | No |
| Material | Aluminum |
| Model | 4150 |
| Primary Main Jet | 70 |
| Primary Power Valve | 6.5 |
| Primary Pump Nozzle Size | 31 |
| Product Type | Factory Refurbished Carburetor |
| Secondaries | Vacuum |
| Secondary Main Jet | 75 |
| Supercharged Application | No |
| Throttle Bore | 1.688 inch |
| Vacuum Ports | 1 timed (spark) port, 2 full, and 1 PCV port |
| Warranty | Limited 90 Day |
| Part Number | FR-83770 |
Service Parts
![Inlet Needle - Viton]()
Inlet Needle Viton® Tip Adjustable 0.110" Seat Size (Viton® is a registered trademark of DuPont Performance Elastomers)$17.69Qty:![Fuel Bowl Gasket]()
For Model 2300™, Model 4150™, Model 4160™ and Model 4500™ Two Circuit Carburetors$11.48Qty:![Single-Stage Power Valve]()
![GM AOD Kickdown Cable Bracket]()
Kickdown Cable Bracket For Use Only On Models 4150 & 4160 carburetors with 700R-4 transmissions.$27.65Qty:![700R-4 KICKDOWN THROTTLE Bracket]()
![Metering Block Gasket]()
For Models 2300™, Model 4150™ Model 4160™ and Model 4500™ without Intermediate Circuit$11.48Qty:![Renew Kit Carburetor Rebuild Kit]()
Renew Kit Carburetor Rebuild Kit Carburetor PN[0-80670/0-80770/0-81670/0-83670/0-85670/0-81770/0-83770/0-85770]$39.72Qty:![Ford Trans. Hardware Kit]()
![Carburetor Standard Main Jet]()
![Carburetor Standard Main Jet]()
![Carburetor Throttle Cable Bracket]()
![Trick Kit Carburetor Rebuild Kit]()
Trick Kit Carburetor Rebuild Kit Holley Vac. Sec. & Double Pump$138.95Qty:![Universal Carb Installation Kit]()
Carburetor installation kit for square and spread bore carburetors$22.97Qty:![Carburetor Adapter Plate]()
![Primary Metering Block, 0-80770]()
![Throttle Body Kit, 0-80770]()
![Secondary Metering Block, 0-80770]()
Emissions
3
This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
The following vehicles are considered Racing Use Only Vehicles:
- Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
The following vehicles are considered Emissions Controlled Vehicles:
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicle
*Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.
