Holley Sniper EFI 4150 Super Sniper 650
650 HP Sniper EFI 4 Barrel Fuel Injection Conversion - Self-Tuning Kit + Handheld EFI Monitor - Classic Gold Finish
$1,199.95 Your Price
Starting at $106 a month with Learn More
- 650 HP version features four 100 Lb/Hr Injectors
- Compatible with Draw-Thru or Blow-Thru forced induction applications
- User-friendly Boost Control with handheld adjustability
- Programmable Target Air Fuel Ratios per Boost level
- Advanced boost control is available via free Sniper EFI tuning software, including Boost vs RPM and Boost vs Time – Same popular boost control offered in Holley HP and Dominator EFI systems!
- 2.5 Bar MAP sensor included which safely works on applications up to 21.5 PSI
- Built-in Single stage progressive nitrous control
- Dry or Wet Nitrous Support
- Progressive or Non-Progressive control strategies
- Lean/Rich AFR Cutoff
- Time or RPM based Timing Retard and much more!
- Integrated ignition timing control for precise timing curves
- Programmable inputs and outputs
- Three Programmable 0-5V Sensor Inputs for Oil/Fuel/Dome or Nitrous Pressure Sensors
- Six Programmable Ground Outputs
- One +5v Reference Output - +5V Power Supply for 0-5v Sensors
- One Sensor Ground – Ground supply for 0-5v Sensors
- Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (Preset to 58.5 PSI) for N/A or Nitrous applications
- Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI!
- Only 4 Wiring Connections Required! (Battery +, Battery-, Switched Ignition & RPM)
- High-Resolution Full Color Touchscreen for initial Setup, Tuning, and Gauge Displays
- Simple Calibration Wizard (Answer a few questions about your engine, and it creates the base map, then starts tuning on its own!) - NO laptop required!
- The included Genuine Bosch LSU 4.9 Wideband Oxygen Sensor provides real-time Fuel Map Learn!
- OEM Style TPS/IAC and fuel pressure regulator, for years of dependable service
- Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with Stainless Steel T-Bolt clamps and a Stainless Steel (Weldable) oxygen sensor flange
- Throttle body mounted ECU – no extra boxes to mount
- USB to CAN Communication cable included for easy laptop tuning of advanced controls
- Dual Pattern bolt on carburetor replacement, designed to fit 4150 Flange & Spread Bore manifolds - (Spread Bore Sealing Plate Part #9006 recommended)
- Certified to ISO 8846, SAE J1171 & United States Coast Guard Requirements for Ignition Protection & Fire Resistance. Making Sniper EFI the perfect choice for carburetor to marine fuel injection conversions!
- A Flame Arrestor is REQUIRED for marine installations, such as part number, 720-1 or 720-13
- Compatible with Holley EFI analog gauges and electronic dashes
- Patent Pending
|Brand||Holley Sniper EFI|
|Injector Size||100 lb/hr @ 58.5 PSI|
|Inlet / Outlet Size||9/16-18 Female O-Ring (AN 6)|
|Max Horsepower Rating||650 Forced Induction|
|Product Type||Sniper 4BBL TBI Kits|
- Available for Any Plumbing Situation And Many Custom Applications.$5.95Qty:
This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
Racing Vehicles are vehicles that are used exclusively for racing or other forms of competition that are not registered and that may never be used on the street.
*Free Shipping & Handling only offered to the contiguous US on orders over $100.
Some parts are not legal for use in California or other states with similar regulations.