Holley set the bar in 2011 with the release of the HP and Dominator in-line fuel pumps. In 2015, Holley has raised the bar again with the introduction of the VR1 and VR2 Brushless in-line fuel pumps. Featuring brushless pump technology and a twin screw rotor design, the VR1 and VR2 in-line fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. Designed to work on high boosted race cars as well as your daily driven weekend endurance car, these pumps work with gasoline, methanol, and E-85* and can maintain pressures of 130 PSI and up to 335 GPH flow**. Fueled by TI Automotive.
The pumps include a 2 step controller for pump speed control.
The pumps can be ran in one of two different speeds. A low speed
control for low fuel consumption requirements or at full speed
for high fuel consumption requirements. The VR2 includes (2) controllers for precise control of both pumps independently of each other. Both the VR1 and VR2 pumps are proven for 18.5V compatibility.
**At 13.8V
* Overall pump dimensions: 9.5" Long; 4.75" Wide; 2.75" Tall
Features:
Capable of 130 PSI while providing significant flow forced induction applaications where belt driven pumps are normally used.
Unlike other pumps, the VR Series are built for continuous duty if needed.
The dual pump models are designed for endurance racing where both pumps are used or one can be a reserve pump.
Billet aluminum construction for durability and good looks
Features a dual 10 AN O-ring inlet and a single 10 AN O-ring outlet
High flow and high pressure with low amperage draw
Can be fully submerged in the fuel cell or chassis mounted
Maximum amp draw of 38 AMPS for the VR2
Holley also offers a complete line of fuel filters and fuel pressure regulators that are designed to work as a system with these pumps
Specs
Application
Universal
Brand
Holley
Emission Code
5
Free Flow GPH
335 @ 13.8 Volts
Free Flow LPH
1250
Fuel System
Carbureted
EFI
Fuel Type
E85
Gasoline
Methanol
Inlet Qty
2
Inlet Size
10 AN O-ring
Material
Aluminum
Outlet Size
10 AN O-ring
Product Type
Brushless Fuel Pump
Pump Body Color
Black
Warranty
Limited 90 Day
UPC
090127731178
Part Number
12-3000-2
Emissions
5
This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
*Compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event
*These pumps are not for use on aircrafts of any type.
* Overall pump dimensions: 9.5" Long; 4.75" Wide; 2.75" Tall
These pumps do not have an internal bypass. A bypass style regulator and return line are required.
HP estimates are based on gasoline. Estimates calculated at 18.5V and at .5 BSFC NA and .65 BSFC FI. Individual systems will vary based on fuel system design, regulator type, fuel cell location, launch G's, etc.
Proper fuel system engineering is critical for maximum performance.
This pump is not designed to use a standard conical seat style union in the inlet or outlet of the pump. Example: Part # AT981510ERL. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as :Part # AT985010ERL.